Name: R-KEM II Bonded Anchors /Chemical Mortar - Liberty Bolt and Nut
Availability: InStock

R-KEM II Bonded Anchors /Chemical Mortar

R0.00

Available in a winter version with faster curing time. It can be used from -20°C.
Three colors – standard, stone & gray
The most convenient bonded anchor for general purpose use
Approved for 15 substrates
Quick, secure and simple installation
Product with wide spectrum of use in the medium load capacity area
Ideal for applications where mechanical anchors are not suitable
Easy dosage thanks to patented self-opening system and use of manual or electric gun
Option of use standard manual silicone gun
Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Jamie / Pre-sale Questions Need Help? Contact Us via WhatsApp

Description

Installation Guide

Drill hole to the required diameter and depth for stud size being used.
Solid substrates: Clean the drill hole thoroughly with brush and hand pump at least four times before installation.
Hollow substrates: insert mesh sleeve into the hole.
Insert R-KEM II cartridge into gun and attach nozzle.
Dispense to waste until even colour is obtained.
Solid substrates: Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Hollow substrates: Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 100% of its depth.
Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Attach fixture and tighten the nut to the required torque.